Can someone tell me what engine this is? 🇺🇸

Well just take a look a the picture here.

Looks like a small block for sure…

shelvin said:
Looks like a small block for sure…

You’re not wrong!

AndrewCarFan said:

shelvin said:
Looks like a small block for sure…

You’re not wrong!

5.0L maybe?

ExplorerEnthusiast said:

AndrewCarFan said:
shelvin said:
Looks like a small block for sure…

You’re not wrong!

5.0L maybe?

Short stroke bore too.

RichardMiller said:

ExplorerEnthusiast said:
AndrewCarFan said:
shelvin said:
Looks like a small block for sure…

You’re not wrong!

5.0L maybe?

Short stroke bore too.

I wouldn’t call it short, it’s more like average. Maybe even above average.

shelvin said:
Looks like a small block for sure…

Nice!

That’s a Coyote 5.0 short block. https://www.teamjdm.com/gen-3-2018-mustang-f150-coyote-engine-block-m-6010-m504vc/

Bravin said:
That’s a Coyote 5.0 short block. https://www.teamjdm.com/gen-3-2018-mustang-f150-coyote-engine-block-m-6010-m504vc/

Yes sir! :metal:

Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

AndrewCarFan said:

LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

Magdaline said:

AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

AndrewCarFan said:

Magdaline said:
AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

Well, I’m buying one then!

Magdaline said:

AndrewCarFan said:
Magdaline said:
AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

Well, I’m buying one then!

Thank you for supporting our mini engine project! :blush:

AndrewCarFan said:

Magdaline said:
AndrewCarFan said:
Magdaline said:
AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

Well, I’m buying one then!

Thank you for supporting our mini engine project! :blush:

These are awesome! Got a promo code by chance?

Ann said:

AndrewCarFan said:
Magdaline said:
AndrewCarFan said:
Magdaline said:
AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

Well, I’m buying one then!

Thank you for supporting our mini engine project! :blush:

These are awesome! Got a promo code by chance?

Already bought it! :joy:

AndrewCarFan said:

Magdaline said:
AndrewCarFan said:
LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Probably going to cost a bit, but I’d love to get one! Maybe I can find a shrink ray for my spare 302? :joy:

No shrink rays here! :joy: They’re just $30 on desktopengines.com.

Well, now I need to get one too…

AndrewCarFan said:

LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Could you make this into a working model with moving parts?

AndrewCarFan said:

LillyGrace said:
Looks like a mini-Coyote, maybe a Coyote pup? If you’re building the full engine, could you share the STLs? I made an LS from ‘engine_eric’ and it was fun.

Yep, this is the pup block! Hopefully, it’ll grow into a full engine one day. Sadly, this is a private model we made at the studio, so I can’t release it just yet :cry:

Is it for the new mini Ranger? :joy: